MVR蒸發系統設備廠家-無錫弘通石化裝備有限公司歡迎您!

當前位置:HOME > 天天看高清影视在线系列 > 濃縮蒸發設備 > ZN-C型新型濃縮罐 >

 
天天看高清影视在线概述/Product overview
1、ZN-C型是加長筒體分離段;
2、爲克服濃縮權頂二次蒸汽在末進入冷凝器前被冷疑而返回罐內的缺點。本設備將冷凝器改爲斜臥式;
3、为提高设备的生産能力,本设备将浓缩罐夹套的加热面积,冷凝、冷却器的面积均有不同程度加大;
4、爲防止濃縮罐出液管的死角,本天天看高清影视在线中采用不鏽鋼球形考克;
5、在濃縮罐下部設置了快開式手孔,以使清理罐內殘液,殘渣;
6、ZN-C型是將加熱夾套分兩段或三段,當液面低時關必閉上段加熱防止幹壁。其底改爲錐底便于排盡濃縮液。
1. ZN-C type is separation section of extended cylinder body
2. The condenser of this equipment is of inclined type in order to overcome disadvantages of secondary steam (on top part) condensation and flowing back to the concentrator before entering the condenser.
3. In order to improve production ability, heating area of jacket of the concentrator, area of condenser and cooler has been increased with different degrees.
4. Stainless steel ball cock is used to prevent dead corner in liquid outlet pipe of the concentrator
5. Quick-open hand hole is set at lower part of the concentrator to clear residual liquid and slag inside the concentrator.
6. The ZN-C type divides the heating jacket into two or three sections. When the liquid level is low, the upper section shall be heated to prevent dry wall forming. The bottom part shall be replaced with cone-shaped bottom to make it easier for concentration liquid discharging.

主要技术参数参考表/Reference table of main technical parameters
展開